Desk cm. 160 with supporting cabinet

N.01 Desk cm.160
Worktop made of 25 mm thick wooden conglomerate covered with white, light grey, light oak, tobacco oak, walnut
“Maroncelli” or umber melamine with 2 mm thick ABS perimeter edges. Desk complete with fabric front screen. Metal leg composed of a vertical shaft in rectangular section tubular steel 80x60 mm thick 2.5 mm with upper plate and base made of 2 mm thick printed sheet metal. All in semi-gloss white, embossed aluminium or semi-gloss anthracite. The base is fixed to the shaft using a joint made of chromed ABS. At the point of union between the shaft and the upper plate there is a closing cap made of chromed ABS. At the ends of the upper plate there are two supports made of white finish printed ABS. (“Type C” Ref. Normative EN 527-1:2011 - Sitting only) Load-bearing unit made of 18 mm thick wooden conglomerate with white, aluminium or anthracite melamine covering with 1.5 mm thick visible ABS perimeter edge. The sliding doors are hooked with special supports to the aluminium tracks applied inside the unit. Push-button lock with double folding key and grey ABS handle. No. 5 black ABS levelling feet.

Dimensions: cm. 170x160x74 h.

Main construction materials: 18 mm thick wooden conglomerate covered with white melamine, “Maroncelli” walnut, light oak, tobacco oak, dark oak, light grey or umber with 2 mm thick ABS perimeter edges

Made in Italy