Zed counters

Functional and elegant reception counters. Made of melamine and available in different finishes. Easily configurable. On request, it is possible to insert LED lighting in the lower part of the reception shelf.
Forms
Linear and angular structural modules made of chipboard panels th. 25 mm, covered with decorative paper impregnated with melamine resin with perimeter edges in shockproof ABS th. 2mm matching. Composed of a horizontal panel in p. 200 mm and a vertical panel, joined by means of special hardware at 90°, in the joining sides cut at 45°. Panel density: 670/730 kg/m3
Work plans
Made of wood conglomerate panel th. 30 mm, covered with decorative paper impregnated in scratch-resistant and washable melamine resin with perimeter edges in shockproof ABS th. 2mm matching. Panel density: 670/730 kg/m3
Reception shelves in melamine
Made of wood conglomerate panels th. 30 mm, covered with decorative paper impregnated with melamine resin, with perimeter edges in shockproof ABS th. 2mm matching. Composed of a horizontal panel p. 350 mm and a vertical panel, joined by means of special hardware at 90°, in the joining sides cut at 45°.
Panel density: 670/730 kg/m3
Reception shelves in lacquered melamine
Made of wood conglomerate panel th. 30 mm, with perimeter edges in shockproof ABS th. 2 mm, painted in matt lacquer. Composed of a horizontal panel p. 350 mm and a vertical panel, joined by means of special hardware at 90°, in the joining sides cut at 45°. Panel density: 670/730 kg/m3
Reception shelves in melamine covered in leather
Made of wood conglomerate panel th. 30 mm, with perimeter edges in shockproof ABS th. 2mm. Composed of a horizontal panel p. 350 mm and a vertical panel, joined by means of special hardware at 90°, in the joining sides cut at 45°. The external sides are covered in regenerated leather, a single piece turned up on the four sides. On the outside, along the perimeter, there is a decorative seam that serves as a frame.
Metal structures
Legs made of 50x50 mm square section pickled profiled tube, 1.5 mm thick with top support brackets in pickled bent sheet metal th. 3mm. Painted with epoxy powders.