Vogue counters

Reception height : 1096mm Internal vertical construction panel is made by particleboard foiled with anti-reflection melamine 18 mm thick (density 720 kg/m3, class E1 with low emission of formaldehyde), fire class 2. Panel is trimmed with 0.5 mm ABS trim. External side has metal fixings to hang on decorative panels. Panel is fitted with adjustable die-cast aluminum foot h. 50 mm with range +/-10 mm. Adjustment from operator side. Reception is preset for cable passage of led lights. Finishing and protecting plinth: Plinth is in folded metal sheet material, coated with epoxy powder, height 70 mm, thickness 1 mm and it is screwed to the panel edge. Reception tops: Tops are made by particleboard foiled with anti-reflection melamine 28 mm thick (density 720 kg/m3, class E1 with low emission of formaldehyde), fire class 2. Tops are trimmed with 0.5 mm ABS trim. As a standard, each reception top has a central flap (dim. 260x123 mm) for wires. Reception top is 710 mm deep. Clearance from floor to underneath top is 712 mm. Reception top supports: They are supports for top, made in folded metal sheet material, coated with epoxy powder, thickness 4 mm They are junction elements between top and vertical internal panel. Decorative panels: Panels can be changed easily. They are rectangular, 470 mm height. 45 degrees cut and attached corner panels. • Panels are made by particleboard foiled with anti-reflection melamine 28 mm thick (density 720 kg/m3, class E1 with low emission of formaldehyde), fire class 2. They are trimmed with 0.5 mm ABS trim. • Panels are made in MDF 18 mm thick. They can be either lacquered with matt varnishes 20 or brushed glossy lacquered 80 Top reception: 70 mm height and 210 mm long Tops are made in folding MDF 18 mm thick. Double rollaway fixing by bushes and zinc plated metal supports. All rectangular tops have holes in the internal side to hang in case glass shelf. Glass shelf : The glass shelf is an option. Extra clear glass (extrafloat) shelf by 10 mm thickness. Dimensions available are 600 and 1000 mm lenght by 300 mm depth. It’s installed on the top with rectangular steel bolts, which section is 120x30x1500 with a double fixing installation point as to be fixed perfectly. In the same carton box a line-art drawing is included in order to allow any other possible position of the shelf. Wiring management: metal wiring cable duct by 1 mm thick, 13 cm wide 9 cm height has open sides as to allow wirings to go through. It’s an inspectional wiring element and it’s fixed with bushes underneath the table top. End and middle panels: • Made by particleboard foiled with anti-reflection melamine 28 mm thick (density 720 kg/m3, class E1 with low emission of formaldehyde), fire class 2. Panels are trimmed with 0.5 mm ABS trim. • Made by mdf thickness 28 with opaque or glossy frames Closing panel has levelling feet and brackets to attach table top and shelves, the middle panel is equipped with grommets diameter 80 mm. Led lights: Led lights are an option. Flexible strip led, cut to size, installed with a tape and wrapped with curved silicon covering, 60 led per meter.