Conference table with faux leather insert

No. 01 Conference table, 280 cm
The tabletop of the conference table is made of 18 mm thick wood conglomerate panels (MDF), 0.6 mm thick wood veneer, and longitudinally folded sides to obtain 50 mm high strips from a single piece. It has 1 mm thick wood perimeter edges, 0.5 mm rounded corners, and a matte transparent semi-open pore varnish. The faux leather insert is made of 18 mm thick wood conglomerate panel, coated with melamine paper, with perimeter edges in paper. The visible sides are covered in 1.3 mm thick faux leather, finished with decorative tone-on-tone stitching along the perimeter. The veneered legs are made of 50 mm thick wood conglomerate panel, 0.6 mm thick wood veneer on both sides, with 1 mm thick wood perimeter edges, 0.5 mm rounded corners, and a matte transparent semi-open pore varnish. The legs consist of two vertical panels, joined together with suitable hardware at a 90° angle, with the connecting sides cut at a 45° angle.
Dimensions: 280 cm x 140 cm x 76 cm height.