Line 402 | Ufficiostile

WORKTOPS:
Manufactured in 18 mm thick wood conglomerate, coated with white, light grey, light oak, tobacco oak, “Maroncelli” walnut or umber melamine with 2 mm thick ABS edge profile; or in 18 mm thick MDF coated with black matt melamine with 2 mm thick ABS edge profiles. 
WORKTOPS WITH SLOTS AND TWO TOP ACCESS:
Manufactured in 18 mm thick wood conglomerate, coated with white, “Maroncelli” walnut, light oak, tobacco oak, light grey, or umber melamine with 2 mm thick ABS edge profile; or in 18 mm thick MDF coated with black matt melamine with 2 mm thick ABS edge profiles. On the worktop surface special slots are machined, equipped with gaskets and light grey ABS cover caps, that allow the fixing of nylon or zamak supports for frontal panels, or conical supports for lamps. The worktops are also equipped with n. 2 Top Access in aluminium, 24x10 mm including a lid to enable wire exit on the desk top. 
GLASS WORKTOP:
Manufactured in tempered extra-bright glass, rear-lacquered in white or black, with acetated surface in 10 mm thickness. All edges are polished. The tops are equipped with stainless steel rings, 40 mm diameter, glued under the worktop surface for fixing to the metal desk structures.
METAL LEGS WITH FIX HEIGHT: 
(“Type C” Re: EN 527-1:2011 Norm):
Reversed “U” shaped legs composed of a horizontal metal beam with a rectangular section of 50x40x1,5 mm thickness and two vertical metaltube posts with a rectangular section of 50x30x2 mm thickness. Terminal and middle legs are available in following finishes: semi-gloss white, structured aluminium or anthracite. • Each vertical post of the terminal legs is equipped with a top cover cap and ferrule in white, grey or anthracite finish, with height adjustable foot. • The middle legs are integrated with special stamped sheet metal spacers, which are welded onto the horizontal transversal beams and help to compensate the length of the beams positioned under the worktop. Each of the ends of the transversal beams is completed with chromed white, grey or anthracite finish cover caps, whilst the vertical posts are equipped with top cover caps, ferrules in white, grey or anthracite finish, with height adjustable feet. Besides, the middle legs can accommodate the cables, with the application of a pair of metal casings in pressed, drilled and moulded sheet metal, painted in following colours: semi-gloss white, structured aluminium or anthracite. These include an ABS cable-through, attached at the bottom. Terminal legs are connected to the beams through special joining elements, made of moulded nylon, that are inserted in dedicated holes, available on the horizontal leg-beams. 
RH/LH SERVICE UNIT WITH SLIDING DOORS, BE-FACIAL OR SINGLE SIDED: 
Body manufactured in 18 mm thick wood conglomerate, coated in white, aluminium or anthracite finish melamine and 1,5 mm thick ABS edge banding on the perimeter. The sliding doors, when available, are manufactured in 18 mm thick wood conglomerate coated in aluminium, bamboo green, poppy red, mustard yellow, umber, turquoise blue colour melamine and they have 1,5 mm thick ABS edge banding in aluminium colour.  When coated in white, light grey, light oak, tobacco oak and “Maroncelli” walnut colour melamine, they have a matching 1,5 mm thick ABS edge banding; or in 18 mm thick MDF coated with black matt melamine with matching 1,5 mm thick ABS edge banding. Doors are fixed through special brackets to the aluminium rails applied from the inside of the cabinet and more precisely n. 2 under the top and n. 2 on the bottom. Push lock with two bendable keys with grey ABS key-caps. N. 5 height adjustable feet in black ABS.  For the connection of the service unit to the desk, supports (*) manufactured with the same characteristics of the desk legs are available.  Optional drawer for this service unit, manufactured in wood conglomerate and coated with white or aluminium finish melamine.