Ufficiostile Line 413

WORKTOPS:  Made of 50 mm thick wood conglomerate coated with melamine in light oak or “Maroncelli” walnut, with 2 mm thick ABS edge-profiles. 
FINISHING TOP (optional):  Finishing tops are available, on the operator side and side extension, in 10 mm thick white or black tempered silkscreen glass with acetated surface and with polished edge-profiles. Finishing top on visitor side and peninsulas are available in 10 mm thick wood conglomerate coated with melamine in light oak or “Maroncelli” walnut, with 2 mm thick ABS edge-profiles. Finishing top are combined to the 50 mm thick worktop of the desk with adhesive velcro. Worktops of every desk are equipped with top access with openable door from one side to allow passage of cables. The flip door of the top access is coated in the same finish as the melamine worktop (light oak or “Maroncelli” walnut) or in silkscreen glass (white or black).
FOLDING LEG:  Right and left legs made in 18 mm thick wood conglomerate coated with melamine in light oak or “Maroncelli” walnut, with 0.45 mm thick ABS edge-profiles; or in 18 mm thick MDF coated with melamine in black matt. The total thickness of the leg is 100 mm using “folding” technique. The leg is composed of 3 different pieces in folding which are jointed by means of specific hardware and 1 mm thick steel spacers.   Lower base made in extruded aluminium painted in aluminium, white or anthracite colour. Profile is equipped with terminal caps in die-cast zamak with chromed surface and black leveller feet.  Folding leg is equipped with inspectable compartment with removable carter 15/10 mm thick sheet metal painted in aluminium, white or anthracite colour. Cables climb into a basket made in 10/10 mm thick sheet metal placed underneath the worktop’s top access; covering carter in 10/10 mm thick sheet metal; both painted in aluminium, white or anthracite colour. 
MODESTY PANEL:  Made of 30 mm thick wood conglomerate coated with melamine in light oak or “Maroncelli” walnut, with 2 mm thick ABS edge-profiles.
METAL STRUCTURES:  Frame made with “C” shaped beam, with a leg and a lower base with rectangular section L.100 x H. 20 mm in extruded aluminium. All painted in aluminium, white or anthracite colour. Connection joints in die-cast zamak with chromed surface. All connected with specific hardware. Black leveller feet.