executive office furniture| Asser Line

Work surface Work surface made of chipboard (density 720 kg/m3, E1 class formaldehyde emission, fire reaction "D-s2, d0" / "Class 2") with a thickness of 38 mm, laminated with anti-reflective melamine resin and edged with 2 mm thick ABS (with beveled edges). The surface has threaded inserts for attaching the structure. The height of the work surface from the floor is 740 mm.

Legs / side panel Leg made of chipboard (density 720 kg/m3, E1 class formaldehyde emission, fire reaction "D-s2, d0" / "Class 2") with a thickness of 38 mm, laminated with anti-reflective melamine resin and edged with 2 mm thick ABS (with beveled edges) on visible sides. The grain of the leg runs horizontally. It is attached to the surface through a barrel joint. The leg has a milled groove on the top for accommodating a 4 mm thick oxidized extruded aluminum profile with beveled edges on the visible sides, fixed to the leg with screws. It is equipped with adjustable steel feet (ø 30 mm) coated with polyethylene, allowing for a vertical adjustment of + 10 mm. The leg protrudes laterally from the surface by 17 mm.

Glass extension Consists of a 10 mm thick tempered glass, acid-etched on the upper side and painted on the lower side, bonded to a 28 mm thick chipboard (density 720 kg/m3, E1 class formaldehyde emission, fire reaction "D-s2, d0" / "Class 2") laminated with anti-reflective melamine resin and edged with 2 mm thick ABS. The chipboard has threaded inserts for attaching the structure. The painted glass versions (white or dove gray) are extra-clear.

Skirt Skirt made of chipboard (density 720 kg/m3, E1 class formaldehyde emission, fire reaction "D-s2, d0" / "Class 2") with a thickness of 18 mm, laminated with anti-reflective melamine resin and edged with 2 mm thick ABS (with beveled edges). It is attached to the leg through a barrel joint and an "L" bracket (163 x 53 mm, 3 mm thick) made of powder-coated steel sheet. The standard skirt height is 300 mm or 530 mm. There is a 50 mm gap between the skirt and the surface to allow for cable management.

SERVICE UNIT WITH SLIDING DOORS Shell Made of chipboard panels (density 720 kg/m3, E1 class formaldehyde emission, fire reaction "D-s2, d0" / "Class 2") with a thickness of 18 mm, laminated with anti-reflective melamine resin and edged with 2 mm thick ABS (with beveled edges) on visible sides. The interior space is divided into 3 compartments: 2 with a width of 390 mm and 1 with a width of 797 mm. Each compartment has a useful depth of 580 mm and a useful height of 495 mm. Two movable shelves with a width of 390 mm are included as standard. The movable shelf with a width of 797 mm is available upon request. The side panels are drilled to allow for adjustable shelf placement at 32 mm intervals. It is equipped with 27 mm high ABS feet with a maximum adjustment range of + 10 mm. The unit features an internal cable management system. Cables enter from the top through a flap positioned on the top. The central compartment shelf allows for the placement of power strips and/or adapters and is equipped